+607 557 6078       +607 557 6079
Select Page
AUSTRALIA REBAR, AUSTRALIA DEFORMED STEEL BAR, AUSTRALIA DEFORMED REINFORCING BAR

REBAR, DEFORMED STEEL BAR, DEFORMED REINFORCING BAR

RM deformed reinforcing bar (rebar) are normally used in a range of residential, commercial and infrastructure applications from concrete slabs to prefabricated beams, columns, cages and precast products.

RM deformed reinforcing bar (rebar) is formed from carbon steel and is given ridges for better mechanical anchoring reinforced concrete.

RM deformed reinforcing bar (rebar) are rods of steels provided with lugs, ribs or deformation on the surface of bar in which this bars minimizes slippage in concrete and increases the bond between the two materials.

RM deformed reinforcing bar (rebar) is commonly used as a tensioning device in reinforced concrete and reinforced masonry structures holding the concrete in compression and has more tensile stresses than that of mild steel plain bars. These deformed bars (rebar mesh) can be used without end hooks. The deformation should be spaced along the bar at substantially uniform distances. 

REBAR (DEFORMED STEEL BAR) MS146:2014 STANDARD (GRD B500B)

Normal Sizes (mm) Length  Pcs/Bdls M.T/Bdls Kg/M
 10 12M  138  1.022  0.617
12 12M 96 1.023 0.888
16 12M 54 1.024 1.58
20 12M 34 1.008 2.47
25 12M 22 1.016 3.85
32 12M 14 1.060 6.31
40 12M 9 1.065 9.86

RM Wire Industries can provide the following processing services for this product:

> Cut-to-Length

> Bending

Please contact us for more information.

  • Commercial Construction
  • Housing Construction
  • Civil Construction

MESH APPLICATION:

  Precast Concrete

Accuracy is the key manufacturing mesh for precast concrete applications such as walls, culverts, drainage pipe.  All CUT & BEND precast mesh is manufactured to ensure that if fits perfectly within precast moulds, steelfixing.

   Pipe Encasement

We supply pairs of CUT & BEND mesh sections that can greatly simplify steelfixing for roadways with high trafffic loads which require Pipe Encasement.

   Mining Applications

Sheets of mesh can be cut to specific dimensions in order to suit a variety of mining applications and improving the handling of mesh in difficult underground conditions.  All mesh for mining applications is taylor-made for safety improvement and galvanized for corrosive environments.

   Various Types of Footings

We are able to CUT & BEND mesh to suit a wide range of footing requirements.

 

RM Reinforcing Wire Mesh is certified by the standard & Industrial research of Malaysia (SIRIM), MS145 and is able to comply to the following standards from various international standards.

Country Standards Title Yeild Strenght (N/mm2)(MPa)

MALAYSIA

MS 144:2006

MS 144:2014

Cold-reduced steel wire for the reinforcement of Concrete products 500
MALAYSIA

MS 145:2006

MS 145:2014

Steel fabric for reinforcement of concrete 500
MALAYSIA

MS 146:2014

Steel for the reinforcement of concrete – Weldable reinforcing steel – Bar, coil and decoiled products 500

BRITISH

BS: 4483:2005

Steel fabric for reinforcement of concrete 500

SINGAPORE

SS 561:2010

Steel fabric for reinforcement of concrete 500

AUSTRALIA

AS/ANZS 4671:2001

Steel fabric for reinforcement of concrete 500
  • Manufactured in Malaysia
  • Third party accredited by CIDB, SIRIM, STANDARDS MALAYSIA

RM Wire Industries provide delivery services for this product.

Please contact us for more information.

The following downloads are available:

Please contact us for more information.


Need to get in touch with one of our team? Simply fill out the form below. We’d love to hear from you!



REINFORCING WIRE MESH PRODUCTS

REO MESH, REINFORCING WIRE MESH, MESH REINFORCEMENT FOR CONCRETE

REO MESH, REINFORCING WIRE MESH, MESH REINFORCEMENT FOR CONCRETE  RM reinforcing wire mesh (reo mesh) is a multi-purpose steel reinforcing mesh, which is suitable for the use of most structural building slabs and footing.  It consisted of a series of high-strength...

REINFORCING WELDED WIRE MESH (CUT AND BEND SOLUTION MESH)

REINFORCING WELDED WIRE MESH (CUT AND BEND SOLUTION MESH) CUT AND BEND REINFORCING MESH - RM SPECIAL CUSTOMIZED RUN MESH AND CUT & BEND SOLUTION MESH RM reinforcing wire mesh also come with design drawing and customized special run mesh.  Advantages of RM...

LOW CARBON STEEL WIRE, CONCRETE WIRE, NAILS WIRE

LOW CARBON STEEL WIRE, CONCRETE WIRE, NAILS WIRE RM's low carbon steel wire (concrete wire / nails wire) is manufactured in coils, available in diameters ranging from 2.11mm to 12.00mm  The tested yield stress and tensile strength of the wire has a minimum of...

MILD STEEL ROUND BAR, ROUND STEEL BAR

MILD STEEL ROUND BAR, ROUND STEEL BAR RM mild steel round bar (round steel bar) can come with various diameters and finished with smooth and plain surface.  Adhering to international standards, RM plain smooth sound bar is produced by the steel wire rids.  RM mild...

Summary
product image
Author Rating
1star1star1star1star1star
Aggregate Rating
5 based on 14 votes
Brand Name
RM REBAR, REBAR MESH
Product Name
REBAR, REBAR MESH, DEFORMED STEEL BAR, DEFORMED REINFORCING BAR
Price
USD 600/ton - 700/ton
Product Availability
Available in Stock